Powder Coating Equipment

There is a lot of great powder coating equipment on the market for people in the field to take advantage of. Some of the newest powder coating equipment makes life much easier for powder coating professionals and a lot safer than they experienced with the older equipment. There are many great pieces of new powder coating equipment for sale. Within this hub, I will explain a few pieces of powder coating equipment that will serve as great additions to your powder coating business. I will also cover various features to look for if you are considering buying new or used equipment.

One good piece of powder coating equipment is called a phosphatizing system. This system has been uniquely constructed in order to meet specific requirements for pretreating various metals. A system like this is able to cut powder coating costs and yield great results. Most people in the field of powder coating are very satisfied with being able to get this piece of equipment.

If you have ever seen a good quality phosphatizing system, you will likely notice that they contain a very simple, functional control panel to make things as easy as possible for the user. They also typically have a double staged coil to make sure that you get the most out of your heat. Other helpful things in this piece of powder coating equipment include a guard from low water levels. You want to look for a phosphatizing system with a highly efficient burner.

If you have ever done any kind of powder coating, you know that having a good powder coating booth is essential. When looking for a powder coating booth, you always want to make sure that it has disposable filtration. The booths are basically “spray to waste” and have a ton of helpful features such as: great filtration, instructions, a nice set of fans and nut fasteners, as well as motors. You want to make sure that the filtration is safe and effective and having a good powder coating booth should meet your guidelines. I always recommend going with blanket filters due to the fact that they have been established as being effective.

Powder coating pretreatment is not always fun to do when you don’t have quality powder coat equipment. You always want to have a quality electric dry steam generator around because they do such a good job at getting rid of the ugly dirt, slimy oils, and other grit that may be around. If you are in any kind of powder coating workshop, having one of these will be the key to your overall success and quality of work. Nowadays, you can even find cheap home powder coating equipment like a steam phosphatizer for a cheap price. These phosphatizers do a great job at cleaning all of your metals and getting you the best results possible for a cheap price.

When you look for an electric dry steam generator, you will definitely want one with a very quick steam. It should steam in under the time period of twenty five minutes. Some older models can take up to thirty minutes, but most of the newer ones are pretty darn quick. Make sure the display of your powder coating product reads in “gallons per hour,” instead of the all too common “G.P.M. (gallons per minute).” We do not want any product that leaves you with a lot of fumes or that typically yields an open-flame. Make sure that you purchase one that is able to install anywhere and at anytime for all of your steaming needs. You definitely also want to look out for a product that does not require you load a bunch of boiler chemicals. This is dangerous and definitely a waste of time when you can get a much better product for a fairly cheap price.

Most importantly, you always want to get a high quality powder coating oven. I know that there is a lot of used powder coating equipment ovens for sale. You need to keep your eyes open if you haven’t seen many used powder coating equipment products lately, because there are have been plenty of leads lately.

As far as powder coating ovens, you want one that is top-of-the-line. You will probably want to get a large powder coating oven that runs on gas, but you could also opt for an electric oven. If you are considering purchasing any powder coat equipment ovens, then you definitely want to be aware that you should probably find one that has aluminum steel trim with a very efficient burner. If you aren’t getting used powder coating equipment, many companies will often let you test out their product to see how efficient it actually is, and how well it is able to function. Look for an oven with a quality exhaust fan that has a control panel that has already been connected and is already functional.

You definitely will want a at least one double-door and systematic burner box that have been both prepiped and preassembled. Having quality temperature control features as well as a powerful exhaust fan will be of great benefit. Make sure that the instructions and installation features are relatively self-explanatory. You don’t want to be super confused or buy a piece of powder coat equipment that is very difficult to understand.

You will also want your powder coating equipment to always comply with SMACNA, OSHA, NFPA, IRI, and FM standards. If you get in trouble for buying used powder equipment that doesn’t meet specific regulations, don’t say that I didn’t try to warn you! Meeting these regulations is extremely important for your own health and the health of others. Don’t try to use powder coating equipment that does not comply with the work standards and expectations. Good luck to those looking for home powder coating equipment that is cost-effective and highly efficient.